Stone Tile Cleaning & Restoration Liberton

Limestone ultimately looses the original surface. The dull appearance is due to minute scratches on the surface of the tile where it was walked over. Sooner or later, the Limestone will have to be re-polished. We use diamonds to eliminate the dmaage and marks and rebuild the original gloss.

The majority of Limestone tile floors are uneven due to the fact Limestone tiles are not set level. The only way to make a Limestone floor perfectly flat is by grinding away the lippage and uneven tile edges. Limestone floor grinding is an expert process, bringing great results. The Limestone will get a monolithic appearance as a single piece of stone.

After grinding, the Limestone tiles will sit at the same level the grout. It is less of a challenge to maintain a smooth, sleek floor than a bumpy floor. A smooth floor does not have grout depessions to retain dirt. Cracks and chips can be filled with colour matched resin repair fillers. After we have assessed the Limestone floor, we will advise the very best Limestone restoration process.

Find out moreabout our Limestone cleaning Liberton service as well as our entire stone floor cleaning restoration service or Book your free Quote

Slate is a very popular floor and wall tile due to its low porosity and the many varieties and textures of Slate available. We are mostly called to clean slate when it suffers form layers of old sealer with embedded soil, so the appearance looks dull and soiled.

We use rotary scrubbing devices and sealer removal treatments clean the slate. When the professional cleaning is complete , we leave the floor to dry, then apply a long-lasting, easy to clean sealer.

If you've got an appropriate slate, it may be ground smooth, making it much easier to clean.

Get more information about our Slate cleaning and sealing Liberton work along with our comprehensive stone cleaning  systems or Book a Quote

Many Victorian and Edwardian hallways will have floors made of Geometric Encaustic tiles.

The main attributes of Victorian tiles are the natural clay colours and a matt finish.

A large number of these floors were sealed and then covered up with carpet or lino.

Old paint spills, waxes, polishes and sealer residues can make cleaning these types of floors challenging.

A colour intensifying sealer is applied following cleaning, to replace the first colours within the tiles. A topical sealer or wax finish will give the floor tiles with a high-sheen finish.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Liberton service including our entire professional cleaningwork or Book a Quote

Porcelain is classified as a ceramic, but made with different materials to standard ceramic tiles.

This makes Porcelain a lot more resistant to stains and simpler to keep up than traditional ceramic tiles.

If the blend of ingredients isn't right, the surface of the tiles may be porous. just like natural stone floors. If you have got an inferior Porcelain, surface soil may be hard to remove.

We can remove ingrained soil using equipment built to go into the microscopic pits where the soil is held.

After your porcelain floor has been cleaned we are able to use a sealer to protect against everyday soil and spills.

If the porcelain is a solid colour, we could resurface the porcelain, the same as granite or Stone restoration.

Get more information about our Porcelain Tiles Cleaning Liberton floor restoration service and our extensive professional cleaning solutions or Book a Quote.

Natural stone floor cleaning regularly involves additional restoration services. Natural stone floor restoration may take many techniques. All stone and tile floors suffer with surface damage and general wear problems. Foot traffic damage, spots and surface damage happens on the majority of stone and tile floors, ruining the finish, making a floor appear lackluster and unsightly, consequently the need for stone restoration. A polished Stone or granite floor shows wear faster due to traffic abrasion that will start to scratch he finish and alter the gloss. Foot traffic damage sooner or later affects porous natural stone including Sandstone, Travertine, Terracotta and Limestone, which are most often protected with a film-forming surface sealer.

Grout is generally the most sensitive element of a natural stone installation. Soiled grout is a very common problem to be reconciled on natural stone and tile floors. Many natural stone floors also frequently need to have crack, chip or hole repair.

Etching and scratches are generally taken away by resurfacing.We are able to get rid of the existing surface from the natural stone, showing a brand new clean surface.